816 polyurethane(PU) sealant

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+

GAOJIAN 816 is commercial grade, one-part, non-sag, polyurethane sealant that cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, GAOJIAN 816is manufactured in accordance with the ISO/TS 16949:2002.

 The metal plates and the framework of automobile
The welding joint of the refrigeration compartment
The glass curtain wall
The side window glass of the passenger coach

Single components facilitationg  application to prevent the compulsory application once and all after mixed on construction sites ,thus causing no waste
Elastic, Good Initial Adhesion, and Moderate Intensity
Good Gap-filling Capacity
Short Drawing Wire When the Gluing Stops
No Corrosion on Base Material, No Penetration Pollution
Room temperature and humilidity curing:without any necessary heating , there is a wide range of construction temperature ,so construction can be carried out at a temperature betweeen 5oC and 40oC
Good weathering resistence Good Ageing Resistance

Technical Data:

Item                Properities
apperance Black paste
surface drying time 20-80
Curing rate(mm/24) 2-8
Destiny(≈, g/ml) 1.2
Volatile component(≤,%) 4
Hardness (shore A) 40-55
Slack(≤,mm) 0
Tensile strength(≥,Mpa 3.5
Extension at break (≥,%) 500
Shear strength(≥,Mpa) 2
Fracture strength(≥,N/mm) 7
     Strength at a given elongation(≥,MPa) 1
Operating temperature( oC ) -45~90

Storage and shelf life: 
9 months

The sealed place must be completely cleaned and dried. If necessary, washing them with solvents such as toluene or acetone.
In order to keep better appear range. The joint of cover outside areas should be masked with tape before sealants apply.
Sealant can be repaired immediately and the masking tape should be removed before the sealant skins.
Previous using experiment is necessary beforehand.

 Don’t use in structure glazing.
Don’t use in aquarium assembly and sealing.
Don’t use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins. Etc.
Don’t use to joints which is hidden in earth or immersed in water for long time.
Don’t use to complete sealing space, results to lack of hydrosphere can’t good solidify.


Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+

Leave a Reply

电子邮件地址不会被公开。 必填项已用*标注